Wetting, penetration and defoathing agent in pigment printing.
FINOPRINT – KBI
FINOPRINT KBI is a specialty antifrothing, wetting and penetrating agent for use in Printing Process pastes to improve print levelness, definition and colour yield.
TYPE
:
Anionic
CONSTITUTION
:
Based on sulphonated oils.
APPERANCE
:
Amber coloured liquid.
SOLUBILITY
:
Miscible with water in all proportions
COMPATIBILITY
:
Compatible with all conventional Printing Process pastes.
FINOPRINT- KBI
:
Is a high performance wetting agent with excellent penetration properties and low foaming character for a variety of textile Printing Process pastes.
Gives superior Printing Process results, particularly on fabrics which have low penetrability.
Controls frothing in long runs on roller or rotary-screen Printing Process machines where other wetting agents and penetrants cause undesirable foam generation.
No adverse effect on Sea Water and Perspiration fastness of pigment Dyeing Processs.
Is a useful additive in reactive/vat Dyeing Process processes, especially in yarn or piece-Dyeing Process and continuous pad application.
APPLICATION
:
Recommended usage level is 1 –4 parts/100 parts print paste for most Printing Process systems, and 1 –2 g/l in Dyeing Process processes.
STORAGE
:
FINOPRINT - KBI may become viscous
at low temperatures but recovers its original fluidity and efficiency on warming.
NOTE
:
The above information is in good faith but without warranty.
FINOPRINT FW NEW Special is a specialty antifrothing, wetting and penetrating agent for use in printing pastes to improve print levelness, definition and colour yield.
TYPE
:
Anionic
CONSTITUTION
:
Based on sulphonated oils.
APPERANCE
:
Amber coloured liquid.
SOLUBILITY
:
Miscible with water in all proportions
COMPATIBILITY
:
Compatible with all conventional printing pastes.
FINOPRINT FW NEW:
Is a high performance wetting agent with excellent penetration properties and low foaming character for a variety of textile printing pastes.
Gives superior printing results, particularly on fabrics which have low penetrability.
Controls frothing in long runs on roller or rotary-screen printing machines where other wetters and penetrants cause undesirable foam generation.
Is a useful additive in Reactive/Vat dyeing processes, especially in yarn or piece-dyeing and continuous pad application.
Is a useful additive in reactive/vat Dyeing Process processes, especially in yarn or piece-Dyeing Process and continuous pad application.
APPLICATION
:
Recommended usage level is 1 –4 parts/100 parts print paste for most printing systems, and 1 –2 g/l in dyeing processes.
STORAGE
:
Finoprint FW NEW special may become viscous at low
temperatures but recovers its original fluidity and efficiency on warming.
NOTE
:
The above information is in good faith but without warranty.
FINOPRINT – KBI 
