An concentrated product to enhance colour depth in loop ager for disperse prints.
FINOCON LA 44
FINOCON LA 44 is a high-performance accelerant for the fixation of Disperse dye prints on polyester during high-temperature loop steaming.
PROPERTIES
Physical Appearance
:
Pale yellow brown viscous product.
Nature
:
Mixture of nonionic and anionic compounds
Ionic Behavior
:
Miscible with water at room temperature in all proportions
may be slightly turbid.
Solubility
:
Miscible with water in all proportions
Compatibility
:
Compatible with all conventional Printing Process pastes.
FINOPRINT- KBI
:
Compatible with nonionic and anionic products as also with
mild acids and alkalis.
APPLICATION
FINOCON LA 44 is very much useful in Printing Process on polyester fabric with disperse dyes. Addition of 0.5 % of FINOCON LA 44 is suggested for optimum fixation & colour yield
ADVANTAGES
Ensures maximum fixation and colour yield of Disperse dyes during HT Loop-steaming at
170-185 ºC.
Overcomes speckiness problems which are often experienced when using concentrated dyestuffs
Does not impair the brilliancy of bright colours & is unaffected by the type of thickener employed.
STORAGE STABILITY:
Approximately 1 year when stored properly in close containers.
PHYSIOLOGICAL DATA :
When used with usual industrial precautions this product does not cause any injury, but prolonged contact with the skin and splashes going in to the eyes should be avoided handling this product by taking suitable industrial safety measures.
NOTE
:
The above information is in good faith but without warranty.
FINOCON LACM SPL is a high-performance accelerant for the fixation of Disperse dye prints on polyester during high-temperature loop steaming
Physical Appearance
:
Pale yellow Liquid
Nature
:
Mixture of nonionic and anionic compounds
Ionic Behavior : Anionic
Ionic Behavior
:
Anionic
Solubility
:
Miscible with water at room temperature in all proportions may be slightly turbic.
Compatibility
:
Compatible with nonionic and anionic products as also with
mild acids and alkalis.
FINOPRINT- KBI
:
Compatible with nonionic and anionic products as also with
mild acids and alkalis.
APPLICATION
FINOCON LACMSPL is very much useful in Printing Process on polyester fabric with disperse dyes. Addition of 0.2 % of FINOCON LACMSPLis suggested for optimum fixation & colour yield.
ADVANTAGES
Ensures maximum fixation and colour yield of Disperse dyes during HT Loop-steaming at 170-185 ºC.
Overcomes speckiness problems which are often experienced when using concentrated dyestuffs
Does not impair the brilliancy of bright colours & is unaffected by the type of thickener employed.
STORAGE STABILITY:
Approximately 1 year when stored properly in close containers.
PHYSIOLOGICAL DATA :
When used with usual industrial precautions this product does not cause any injury, but prolonged contact with the skin and splashes going in to the eyes should be avoided handling this product by taking suitable industrial safety measures.
NOTE
:
The above information is in good faith but without warranty.
