Anticrease lubricant having emulsification property to remove oils to avoid marks occurring due to fabric-fabric & fabric to metal friction.
FINOLUBE FI
Finolube FI is a preparation and dyebath lubricant to prevent rope marks, creasing and abrasion in cellullosic fabrics and minimise tendency of colour streakiness in winch/jet machines; it is also an efficient one-bath scour-dye anti-crease auxiliary for jet one-bath scour-dye anti crease auxiliary for jet processing of polyester.
TYPE
:
Non-ionic.
CONSITUTION
:
Blend of special phosphate esters.
APPEARANCE
:
Transparent liquid
SOLUBILITY
:
Readily miscible in water
COMPATIBILITY
:
Stable to acids and alkalis; unaffected by hard water or
Electrolytes.
FEATURES
:
promotes opening of the fabric rope and
displacement of folds or creases in cellulosics and polyester.
acts as a lubricant when the fabric rubs against itself
or machine parts, and eliminates yarn/fibre abrasion.
has no restraining effect on dyes.
is highly stable to caustic alkali and to high electrolyte
concentration making it ideal for application of all dyes on cellulosic fibres & their blends.
has excellent emulsifying properties for residual oils,
waxes and fats, and enables a single-bath scour-dye process for 100% polyester.
is non foaming and facilitates smooth running in jet machines with higher machine loading at shorter liquor ratios.
meets EEC legislation for biodegradability-
Biodegradability 83% DOC Removal (Bioeliminiation by modified OECD 301C test, DOC Analysis).
APPLICATION
:
1.
As preparation and dyebath lubricant for cellulose and blends-
Add 0.5 g/l – 1.0 g/l Finolube FI to the scour/bleach bath,
to the dyebath, and the boiling rinse bath in winch or jet machines.
2.
As a jet scour dye agent for 100% polyester fabrics-
Set the bath at 500C with
1-2 g/l Finolube FI
and run for 5-10 mins. Before addition of
0.5 - 1.0 g/l Dispersing Agent
0.5 – 1.0 g/l (pH buffer and sequestrant) to
adjust pH at 4.5 – 5.0
Run for 5-10 mins., and the requisite amount of well-
dispersed dyes, raise the termperature to 130 – 1350C
and maintain there for 15-30 mins.before cooling and draining.The oil and wax emulsifying properties of Finolube FI alongwith its dyebath lubricant action ensure a level dyeing, free from spots, stains and creases, without a separate scouring process.
STORAGE
:
Stable under normal conditions
NOTE
:
The above information is in good faith but without warranty
Finolube AC is a preparation and dyebath lubricant to prevent rope marks, creasing and abrasion in cellullosic fabrics and minimise tendency of colour streakiness in winch/jet machines; it is also an efficient one-bath scour-dye anti-crease auxiliary for jet one-bath scour-dye anti crease auxiliary for jet processing of polyester.
TYPE
:
Anionic.
CONSITUTION
:
Blend of special phosphate esters.
APPEARANCE
:
Light brown liquid
SOLUBILITY
:
Readily miscible in water
COMPATIBILITY
:
Stable to acids and alkalis; unaffected by hard water or
electrolytes.
FEATURES
:
promotes opening of the fabric rope and displacement of
folds or creases in cellulosics and polyester.
acts as a lubricant when the fabric rubs against itself or
machine parts, and eliminates yarn/fibre abrasion.
has no restraining effect on dyes.
is highly stable to caustic alkali and to high electrolyte
concentration making it ideal for application of all dyes on cellulosic fibres & their blends.
has excellent emulsifying properties for residual oils,
waxes and fats, and enables a single-bath scour-dye process for 100% polyester.
is low foaming and facilitates smooth running in jet
machines with higher machine loading at shorter liquor
ratios.
meets EEC legislation for biodegradability-
Biodegradability 83% DOC Removal (Bioeliminiation by modified OECD 301C test, DOC Analysis).
imparts dispersion property
APPLICATION
:
1.
As preparation and dyebath lubricant for cellulose and Blends-
Add 0.5 g/l – 1.0 g/l Finolube AC to the scour/bleach bath, to the dyebath, and the boiling rinse bath in winch or jet machines.
2.
As a jet scour dye agent for 100% polyester fabrics-
Set the bath at 500C with
1-2 g/l Finolube AC
and run for 5-10 mins. Before addition of
0.5 - 1.0 g/l Dispersing Agent
0.5 – 1.0 g/l (pH buffer and sequestrant) to
adjust pH at 4.5 – 5.0
Run for 5-10 mins., and the requisite amount of well-dispersed dyes, raise the temperature to 130 – 1350C and maintain there for 15-30 mins.before cooling and draining.The oil and wax emulsifying properties of Finolube AC alongwith its dyebath lubricant action ensure a level dyeing, free from spots, stains and creases, without a separate scouring process.
STORAGE
:
Stable under normal conditions.
NOTE
:
The above information is in good faith but without warranty
FINOLUBE FI 
