Highly effective soda ash substitute for fixation of all types of Reactive dyes on cellulosics reducing load on effluent treatment plant due to its lower TDS, BOD & COD.
FINOCON ADA Premium
Highly effective soda ash substitute for fixation of all types of Reactive & sulphur dyes on cellulosics, yarn, fibre & garments.
Attributes :
To be used 1/5 to 1/8 of soda ash quantity depending upon the class of reactive dyes and thus reducing the cost of dyeing.
Reduces effluent load and TDS by 60% , so formation of sledge is also reduced.
Gives good exhaustion with good colour yield on cellulosics
When compared to Soda Ash, unlevelling problem shall be minimized in tough shades.
Alkali addition can be done in single time, but in soda ash method it is two times.
Does not impair fastness properties on the dyeings
For neutralization, acid consumption is reduced upto 50 – 60 %.
Suitable for Dyeing Process in all types of m/c and substrate form
Characteristics:
Appearance
:
Colourless to faint yellow clear liquid
Ionic nature
:
Anionic
Constitution
:
Alkali Buffer
I. APPLICATION (EXHAUST) for Reactive dyes
A)
Part Replacement of Soda Ash (For above 2% shade)
Soda Ash
:
20% of the Original Dose recommended
FINOCON ADA Premium
:
1/5 th to 1/8 th of rest of Soda Ash.
B)
Full Replacement of Soda Ash
Depth of Shade
Finocon ADA Premium Dosage in Gpl
Minimum dosage
0.7 Gpl
upto 0.5%
1 to 1.2 Gpl
0.5 - 1 %
1 to 1.8 Gpl
1 - 2 %
1.4 to 2 Gpl
2 - 3 %
1.8 to 2.8 Gpl
3 - 4 %
2.2 to 3.2 Gpl
4 % & above
2.8 to 3.5 Gpl
Maximum
4 Gpl
For above 2% shade; we recommend to make part replacement of soda ash as mentioned above as (A)
II. APPLICATION (Exhaust) for Sulphur Dyes
FINOCON ADA PREMIUM Rest of the recipe will remain same.
:
10 - 15% of Soda Ash
III. APPLICATION (CONTINUOUS)
A)
Continuous Dyeing Process of Triazene (Procion “H” Type)
Hot Brand Reactive Dyes :
Pad – dry – steam - wash
Padding Liquor
Dye
X Parts
Urea
Min. amount
Resist Salt
10 Parts
Soda Ash
2 Parts
Finocon ADA Premium
0.8 Parts
Sodium Alginate
2 Parts
Water
Remaining
Total
1000 Parts
B)
Continuous Dyeing Process with Vinyl Sulphone Dyes
Pad – dry – steam – wash
Padding Liquor
V.S. Dye
X gpl
Urea
50 – 100 gpl
Resist Salt
10 gpl
Soda Ash
As per table
Water
Balance
Total
1000 Litres
Alkali Table
Dyestuff (g/l)
Soda Ash g/l
Finocon ADA Premium g/l
0 – 15
1.2
0.5
15 – 30
1.8
0.7
Above 30
2.4
1.0
Reactive Washing – Off
Diquest SNA -1 gpl at boil
NOTE
:
The above information is in good faith but without warranty.
FINOCON ADA Premium 
