| |
|
|
|
|
FINOX – VS FLAKES is a unique cationic softener, imparting extremely full feel along with good durability. |
|
|
|
| |
|
|
|
|
|
| |
|
|
: |
White flakes |
| |
|
: |
Cationic |
| |
|
|
|
Preparation of 20% paste. Take 80 kg. Water, add 20 kg. FINOX VS FLAKES under continuous stirring (preferably high speed stirring). Continue stirring till FINOX VS FLAKES are fully dispersed. The paste is ready for use. |
| |
|
| |
|
|
| |
|
|
Pad and cure at 180 oC for 30 – 45 sec. at pH 5.5 – 6 with a pickup of 70 – 80 % |
| |
|
|
|
| |
|
|
|
| |
|
|
Adjust pH to 5, treat the fabric at 40 – 70 oC for 30 min. hydroextract and dry at 110 oC – 120 oC. |
| |
|
|
The concentrations may be vary depending upon the softness and type of finish required. |
| |
|
|
| |
: |
The above information is in good faith but without warranty. |
|
|
| |
|
|
FINOX – CP FLAKES is a unique cold water soluble cationic softener, imparting extremely full feel along with good durability. |
| |
|
|
|
| |
|
|
|
|
| |
|
|
: |
Yellowish brown flakes |
| |
|
: |
Cationic |
| |
|
|
Preparation of 20% paste. Take 80 kg. Water, add 20 kg. FINOX – CP FLAKES under continuous stirring (preferably high speed stirring). Continue stirring till FINOX – CP FLAKES are fully dispersed. The paste is ready for use. |
| |
|
|
|
|
|
| |
|
|
| Pad and cure at 180 oC for 30 – 45 sec. at pH 5.5 – 6 with a pickup of 70 – 80 % |
| |
|
|
|
|
| |
|
|
Adjust pH to 5, treat the fabric at 40 – 70 oC for 30 min. hydroextract and dry at 110 oC – 120 oC.
The concentrations may be vary depending upon the softness and type of finish required.
|
| |
|
|
| |
: |
The above information is in good faith but without warranty. |
| |
|
|
|
(Concentrated liquid cationic softener) |
| |
FINOX CT Conc is an exclusive low foam hydrophilic concentrate softener in liquid form that imparts a very soft and lofty handle to cotton and its blends. FINOX CT Conc is particularly suitable for Finishing Process of quality terry towels, clothing fabrics, and heavy knits denim and garments without the risk of severe yellowing of conventional cationics. |
| |
|
|
: |
Cationic |
| |
|
: |
Special blend of amide esters |
| |
|
: |
Light to dark brown colored free flowing liquid. |
|
|
: |
Readily emulsifiable in water. |
|
|
: |
Stable to mild alkalies, acids, and hard water. |
|
|
: |
Stable under normal conditions. |
|
|
: |
Gives a very soft, smooth, flowing handle with good absorbency on variety of fabrics.
|
| |
|
| |
Is resistant to yellowing and does not affect the brightness of the dyed shades. |
| |
|
| |
Has a low foam profile suitable for exhaust application on soft flow, winches, yarn package machines and in tumble washers. |
| |
|
| |
Imparts silky softness hence suitable for sewing threads, cotton yarns and can partially replace silicone softener. |
| |
|
| |
Is easily pourable liquid and hence easy to handle. |
| |
|
|
|
| |
|
|
The concentrate softener is first stirred with 5 to 10 times its weight of water to form a homogeneous emulsion and then added to the bath or diluted to the required concentration. |
| |
|
|
|
| |
|
|
|
| |
|
|
Treat the material at 30-40 deg for 15-20 mins at pH 5 to 5.6 and dried at 110-130 deg for 1 min.
|
| |
|
|
|
| |
|
|
|
| |
|
|
| Pad the fabric through FINOX CT Conc solution and then dry the fabric |
| |
|
|
| |
: |
The above information is in good faith but without warranty. |
|
|
| |
|
|
|
Cationic Softening Agent |
| |
|
|
|
| |
|
|
: |
Cream coloured paste |
| |
|
: |
6.5 to 7.5 |
| |
|
: |
Cationic |
|
|
: |
Soluble in water, also forms stable solution in hard water. |
|
|
: |
Stability increases as the pH of the solution becomes acidic. |
|
|
: |
Non-Hazardous, Non-flamable & Non-toxic |
| |
|
|
|
| |
|
|
Processing of textile consists of a number of unit operations & Finishing Process operation has a unique position. It consists of making the fully processed cloth Soft, Hard water-proof, sanforised etc. Softening Agents can be used at various stages of processing and the selection of a suitable softening agent depends largely on the stage at which it is to be applied.
|
| |
|
|
FINOX LSMD has gained popularity due to its high substantive properties for imparting the desired finish to the fabric.
|
| |
|
|
|
| |
|
|
FINOX LSMD is compatible with all types of nonionic products but it should not be used along with any anionic products as the cationic activity of FINOX LSMD will participate the bath FINOX LSMD can be added with the above substance as per the required softness. The following receipies could be taken as guidelines. |
| |
|
|
: |
2.5 to 10 g / l 2 g / l
for exhaust process
at 30 - 35
|
|
|
: |
0 – 5 to 1% for 20 minutes at 30 – 35 oC |
|
|
| __ For light piece goods of cotton & rayon |
: |
1 to 1.5 g / l |
| |
|
|
| __ For cellulosic Man made fibres |
: |
0.2 to 0.5 g / l |
| |
|
|
| __ For Polyester / Cotton / Nylon |
: |
15 to 25 g / l at 35 o C |
| |
|
|
| __ For baths containing resins |
: |
0.5 to 2 g / l. |
| |
|
|
| |
: |
The above information is in good faith but without warranty. |
| |
|
|
|
|
| |
|
|
|
Excellent Softening Agent having cationic property. |
| |
|
|
: |
cream yellow paste
|
|
6.5 to 7.5 |
: |
Cationic |
|
Soluble in water, also forms stable solution in hard water. |
: |
Good |
: |
Non-Hazadous, Non-flamable & Non-toxic |
| |
|
|
|
|
| |
|
|
Processing of textile consists of a number of unit operation s & Finishing Process operation has a unique position. It consists of making the fully processed cloth Soft, Hard water-proof, sanforised etc. Softening Agents can be used at various stages of processing and the selection of a suitable softening agent depends largely on the stage at which it is to be applied. |
FINOX DM has gained popularity due to its high substantive properties for imparting the desired finish to the fabric. It gives excellent surface & inner feel. |
| |
|
|
|
| |
|
|
FINOX DM is compatible with all types of nonionic products but it should not be used along with any anionic products as the cationic activity of FI NOX DM will participate the bath FINOX DM can be added with the above substance as per the required softness. The following receipies could be taken as guidelines.
|
| |
|
|
: |
2.5 to 10 g / l 2 g / l
for exhaust process
at 30 - 35
|
|
|
: |
0 – 5 to 1% for 20 minutes at 30 – 35 oC |
|
|
| __ For light piece goods of cotton & rayon |
: |
1 to 1.5 g / l |
| |
|
|
| __ For cellulosic Man made fibres |
: |
0.2 to 0.5 g / l |
| |
|
|
| __ For Polyester / Cotton / Nylon |
: |
15 to 25 g / l at 35 o C |
| |
|
|
| __ For baths containing resins |
: |
0.5 to 2 g / l. |
| |
|
|
| |
: |
The above information is in good faith but without warranty. |
| |
|
|
|
| |
|
|
FINOX - SFC is a new modified non – yellowing softener which produces excellent surface smoothness and lasting soft feel coupled with inner softness. |
| |
|
|
|
| |
|
|
 |
Soft and smooth handle with little body. |
| |
|
|
Applicable to all types of fibres. |
| |
|
|
Non-yellowing property. |
| |
|
|
Especially suitable to cellulosic fibres. |
| |
|
|
Readily dilutable. |
| |
|
|
Economical in use |
| |
|
|
|
| |
|
|
: |
pourable liquid |
: |
Miscible with cold water |
| |
|
|
|
|
| |
|
|
|
|
with a pickup 70 – 80 % and cure at 180 oC for 30 – 45 sec. at pH of 5 – 6 |
| |
|
|
|
|
adjust pH 4 – 4.5 and treat the fabric at 50 – 70 oC for 30 min. hydroextract and dry at 110 oC - 120 oC |
| |
|
|
| |
: |
The above information is in good faith but without warranty. |
| |
|
|
|
| |
|
|
FINOX – NIS FLAKES is a unique non-ionic softener, imparting extremely full feel along with good durability. |
| |
|
|
|
| |
|
|
|
Full soft handle |
| |
|
|
Surface smoothness for a wet feel |
| |
|
|
Minimum effect on shade |
| |
|
|
It is effective at low dosages |
| |
|
|
Easy to dilute |
| |
|
|
|
| |
|
|
: |
White flakes |
: |
Nonionic |
| |
|
|
|
| |
|
|
: |
Take 80 kg. Water, add 20 kg. FINOX NIS FLAKES under |
| |
|
|
|
| |
|
|
|
|
Pad and cure at 180 oC for 30 – 45 sec. at pH 5.5 – 6 with a pickup of 70 – 80 %
|
| |
|
|
|
|
Adjust pH to 5, treat the fabric at 40 – 70 oC for 30 min. hydroextract and dry at 110 oC – 120 oC.
The concentrations may vary depending upon the softness and type of finish required.
|
| |
|
|
| |
: |
The above information is in good faith but without warranty. |
| |
|
|
|
| |
|
|
TECHNICAL DATA |
| |
|
|
: |
Based on Polymer Latex |
|
|
: |
Milky White Emulsion |
| |
|
|
: |
8 – 9 |
|
| |
|
|
FINOSOL Conc is a general use softener for all types of Synthetics and Blends which also gives some body and has many special advantages. FINOSOL Conc has a semi-durable nature due to the polymeric latex base. The presence of colloidal silica improves fibre-fibre friction (unlike other softners) avoiding slippage. |
| |
|
|
The latex polymer based product forms a supple film on the fabric surface having no problem of migration for dyed or printed material even in deep shades. |
| |
|
|
The hydrophilic nature also minimise static development problems, soling tendency and maintains the hydrophilic properties. |
| |
|
|
|
| |
|
|
|
| |
|
|
Apart from imparting a soft handle FINOSOL Conc will increase the bonding between the filament and thus reduce the problems of displacemet or slippage of the yarn. |
| |
|
|
|
| |
|
|
FINOSOL Conc forms a soft film increasing the bonding between the individual filaments and thus reduces the picking and snagging tendency. It is particularly useful for texturised knit goods as it maintains the high bulk. |
| |
|
|
|
| |
|
|
FINOSOL Conc imparts softness to these fabrics along with antipilling properties. It does not render
the surface tacky and also avoids problems of migration of dye during long storage.
|
| |
|
|
FINOSOL Conc finish does not impart affect the hydrophobicity to polyester fabrics as is the case with the silicone or cationic softners. The application involves padding in FINOSOL Conc solution (20 – 30 gpl) in the case of blends and (30 – 50 gpl) in the case of 100% Synthetic materials.
|
| |
|
|
: |
Highly cationic substances in concentrate form should not be used alongwith
FINOSOL Conc
|
|
|
|
| |
: |
The above information is in good faith but without warranty. |
| |
|
|
| |
|
|
TECHNICAL DATA : |
| |
|
|
: |
Based on Polymer Latex |
|
|
: |
Milky White Emulsion |
| |
|
|
: |
8 – 9 |
|
| |
|
|
FINOSOL FR is a general use softener for all types of Synthetics and Blends which also gives some body and has many special advantages. FINOSOL FR has a semi-durable nature due to the polymeric latex base. The presence of colloidal silica improves fibre-fibre friction (unlike other softners) avoiding slippage. |
| |
|
|
The latex |
