| |
|
|
|
|
|
| |
| FINSIHING AGENTS based on Polyvinyl acetate dispersion. |
| |
|
|
|
|
: |
White Paste |
| |
|
: |
Nonionic |
| |
|
: |
Can be diluted with both cold as well as hot water. |
| |
|
: |
5 – 6 |
| |
|
: |
Stable to hard water |
| |
|
: |
Good, The containers should be covered to &
avoid drying up of the contents and skin formation. |
| |
|
: |
60000 to 80000 |
| |
|
|
| |
| |
|
|
FINOSOL EM is recommended for durable finishes with a stiff handle on textile of all kinds. There is no loss of light fastness of the finished fabrics.
FINOSOL EM finishes are generally applied by padding. They may, however, also be applied on the winch, the jig, the vat or by spraying on to the goods. In high concentrations, or in combination with products of high viscosity, the squeegee may be used.
The Solution should be stirred from time to time since FINOSOL EM tends to settle out.
FINOSOL EM can also be used in permanent finishing and together with various water proofing agents. As the composition of these agents vary, preliminary experiments to test their compatibility with FINOSOL EM should be carried out. The product can also be applied in neutral or slightly alkaline solutions, however, slight acidic is preferable.
After the finishing process has been completed, the machines used must be cleaned immediately with water or otherwise. Because of the high adhesive power of FINOSOL EM intensive mechanical cleaning will be necessary.
The drying temperature should not be below 800C. The stiffness of the finished goods and their fastness to wash improve as the drying temperature increases. Drying is preferably carried out on the stenter.
While working on a cylinder drying machine, cars must be taken that the materials is well squeezed out before drying and that the first cylinders are wrapped with cloth. The temperature for calendering should not exceed 60oC otherwise the product, because of its thermoplasticity, might be deposited on the calender rollers. |
| |
|
|
| |
|
|
| The required concentration depends on the materials in question, the handle desired and the squeezing effect. The finishing effect can be varied by combining the product with other finishing agents or softners. The following receipies could be taken as guidelines. |
| |
|
|
1. |
Stiff finishes of thin fabrics like cotton, voile, Mull etc.
5 to 10 g / l FINOSOL EM (by pad process). |
2. |
Superfine poplins, Satins, Suitings etc.
3 to 5 g / l FINOSOL EM
2 g / l Softner (by pad process)
|
3. |
Special Buckrum finish
300 to 500 g / l FINOSOL EM (by pad process) |
4. |
Fine quality dress materials, long cloth, poplins, lawns etc.
5 to 15 g / l FINOSOL EM
5 to 15 g / l Wax emulsion
5 g / l Starch |
5. |
Medium quality goods
5 g / l FINOSOL EM
with suitable Starch and filler materials
|
6. |
Spun rayon, Polyamide and other synthetic yarn/fabrics
5 to 20 g / l FINOSOL EM (by pad or exhaust process) |
7. |
Hosiery goods
5 to 15 g / l FINOSOL EM (exhaust process) |
8. |
Thread and nut industries
10 to 15 g / l FINOSOL EM (by exhaust process) |
9. |
Permanent finishing |
| |
| |
150 g / l Urea formaldehyde precondensate
6 g / l Catalyst
2 to 10 g / l FINOSOL EM
10 to 20 g / l Softner
|
| |
2 to 5 g / l FINOSOL EM
20 g / l Magnesium chloride crystals |
| |
|
|
|
| |
: |
The above information is in good faith but without warranty. |
| |
|
|
|
| |
|
| |
|
|
|
| |
|
|
Textile auxiliary based on polyvinyl acetate dispersion containing plasticizer and copolymers. |
| |
|
|
|
| |
|
|
: |
White Paste |
| |
|
: |
Nonionic |
| |
|
: |
Can be diluted with both cold as well as hot water. |
| |
|
: |
6 to 6.5 |
| |
|
: |
Good |
| |
|
: |
600 CPS |
| |
|
|
|
| |
|
|
| It imparts extraordinary fullness body luster and smoothness to cloth. It gives good feel to body in suitings. It is highly used for expensive synthetic material. |
| |
|
|
|
| |
|
|
|
15 g / liter depending on the feel body required.
This may be reduced even upto 5 g/ liter as required. |
| |
|
|
| |
: |
The above information is in good faith but without warranty. |
| |
|
|
| |
|
|
| A textile auxiliary versatile two-in-one textile finishing Agent giving both stiffness & Body along with softness suitably blended together, in optimum suitable proportions. |
| |
|
|
|
| |
|
|
: |
Transparent smooth paste. |
| |
|
: |
7 to 8 |
|
|
: |
Non ionic |
| |
|
: |
Miscible with water with stirring |
|
|
: |
Good, if stored in a cool place. Stable to hard water. |
|
| |
|
|
|
| |
|
|
- 50 g / l for stiff and soft finishes for satins, suitings etc.
- 30 – 50 g / l for dress materials, long cloth, Popline Lawn etc.
- 30 – 40 g / l for Voile, Mills etc.
|
| |
|
|
| |
: |
The above information is in good faith but without warranty. |
| |
|
|
| |
|
|
FINOSOL EM 
