Fineotex Chemical Group of Companies
Textile Auxiliaries & Chemicals in India.
 
     
 
 
 
Finishing Agents Exporters in India.
 Home
 
   
 
 
 
Wax Finishing Process Agents
 
 
Product Name
Properties/Uses
Finolube - PE
Polyethylene wax emulsion softener with lubricant property and soft waxy finish which also helps to minimize tear-strength loss during resin finishing.
Finolube - PET
Polyethylene wax emulsion softener in transparent form with lubricant property and soft waxy finish which also helps to minimize tear-strength loss during resin finishing process.
     

Bullet FINOLUBE PE

 

Permanent waxing & softening agent which also improves the sewability of the fabric

 

CHEMICAL NATURE
 
Non-ionic softner emulsion based on Polyethylene.
     

Properties:

 
Appearance
:
Creamish white liquid with peculiar appealing odour.
     
Ionic
:
Non-ionic
     
Solubility
:
Easily miscible in water in all ratio.
     
Stability
:
Stable to hard-water
     

APPLICATION

   

 

FINOLUBE PE can be used for all types of fabrics and knitted goods, Cotton Polyester blends, wool, silk, Acetate & Viscose rayon ,Polyamide and polyester blends.

 

FINOLUBE PE can be applied alone or mixed with other additives on padding Machines.

     
SPECIAL FEATURES
:
1. Applicable to all types of textiles.
    2. Resilent fall of the fabrics.
    3. Improves crease recovery properties.
    4. Improves tensile strength of acetate Rayon.
    5. Improves lustre.
    6. No yellowing, no curing required.
    7. Improves the sewability of the fabric
       

RECOMMENDATIONS
     

In general the quantity and concentration can be recommended from 10 to 40 gms per litre depending upon the softness, body & fulness required. The following receipies could be taken as guidelines.

     
1. COMBINED RESIN FINISH 20 TO 40 G / L
     
2. HEAVY FINISH FOR SHIRTING 30 TO 40 G / L
     
3. HEAVY GLAZED FINISH FOR PRINTING CHINTZ 30 TO 40 G / L
     
4. LAWN FINISH 40 TO 50 G / L
     
NOTE : The above information is in good faith but without warranty.
   
Top
 

Bullet FINOLUBE PET

 

Permanent waxing & softening agent which also improves the sewability of the fabric

 

CHEMICAL NATURE
 
Non-ionic softner emulsion based on Polyethylene.
     

Properties:

 
Appearance
:
Creamish white liquid with peculiar appealing odour.
     
Ionic
:
Non-ionic
     
Solubility
:
Easily miscible in water in all ratio.
     
Stability
:
Stable to hard-water
     

APPLICATION

   

 

FINOLUBE PET can be used for all types of fabrics and knitted goods, Cotton Polyester blends, wool, silk, Acetate & Viscose rayon ,Polyamide and polyester blends.

 
FINOLUBE PET can be applied alone or mixed with other additives on padding Machines.
     
SPECIAL FEATURES
:
1. Applicable to all types of textiles.
    2. Resilent fall of the fabrics.
    3. Improves crease recovery properties.
    4. Improves tensile strength of acetate Rayon.
    5. Improves lustre.
    6. No yellowing, no curing required.
    7. Improves the sewability of the fabric
       

RECOMMENDATIONS
     
In general the quantity and concentration can be recommended from 10 to 40 gms per litre depending upon the softness, body & fulness required. The following receipies could be taken as guidelines.
     
1. COMBINED RESIN FINISH 20 TO 40 G / L
     
2. HEAVY FINISH FOR SHIRTING 30 TO 40 G / L
     
3. HEAVY GLAZED FINISH FOR PRINTING CHINTZ 30 TO 40 G / L
     
4. LAWN FINISH 40 TO 50 G / L
     
NOTE : The above information is in good faith but without warranty.
   
Top
 
 
Fineotex Chemical Limited
 
 
 
 
Eco Friendly | Product Information | New Proposal | About Us | Contact Us | Feedback Form| Site Map
 
   
Best viewed in 1024*768 Resolution

Fineotex Chemicals : Manufacturers & Exporters of Finishing Process Agents and Wax Finishing Process Agents in India